Wavegrove Mariform v1.0.1 [WiN]

Posted by On 19 11 月, 2025 0 Comment

Wavegrove Mariform

MOCHA | 18 November 2025 | 10.7 MB

Wavegrove Mariform｜变压器饱和效果器｜多频段谐波染色×动态阻抗调制​

核心定位​

Mariform 是一款基于变压器物理建模的智能饱和效果器，通过三频段精准饱和控制与动态阻抗响应系统，为音轨注入兼具模拟温暖感与有机运动特性的谐波染色，适用于单轨处理、编组总线与母带染色场景。

核心技术特性​

🎛️ 变压器饱和引擎​

  • Drive（驱动量）：控制谐波注入强度，从磁带式温和饱和到电子管过载失真
  • Area（频段定位）：独立选择低频/中频/高频作为饱和处理核心区域
  • Area Spectrum Control（频谱微调）：每个频段内设置3个饱和点，精确控制谐振峰

🌀 动态响应系统​

  • Impedance（阻抗模拟）：模拟真实变压器磁芯随信号电平变化的滞后效应，产生“弹性”动态响应
  • Tone（动态音色追踪）：根据输入信号瞬态特性自动调整饱和曲线，避免瞬态钝化
  • Bump（能量激励）：在信号峰值处添加二次谐波冲击力，增强感知响度

⚙️ 高级处理功能​

  • MariAir空气感提升：高频搁架式EQ，补偿饱和可能损失的高频延伸
  • Clipper削峰器：前置/后置可选的软削峰，防止饱和后过载失真
  • Mid/Side处理：单独处理侧边信号增强立体声宽度，或仅对中间信号增加温暖感
  • Delta Monitoring差分监听：独听Mariform添加的谐波成分，便于精细调整

典型应用场景​

应用目标​ 推荐参数策略​
人声温暖感​ 中频区饱和 + 低阻抗设置 + 30%混合比
底鼓冲击力​ 低频饱和 + Bump激励 + 前置削峰
总线胶水效果​ 全频段饱和 + 高阻抗模拟 + Mid/Side宽度控制
母带复古染色​ 高频磁带饱和 + MariAir补偿 + 后置软削峰

工作流提示​

  1. 初始化设置：
    • 使用Delta模式监听饱和内容，避免过度处理
    • 通过High Cut/Low Cut限制处理频段，聚焦目标区域
  2. 阻抗调谐：
    • 高阻抗值适合持续音源（Pad/风琴），低阻抗适合瞬态音源（鼓/贝斯）
  3. 校准匹配：
    • 根据输入电平调整Calibration参数，使阻抗响应适配不同信号强度

“Mariform 让饱和处理不再是静态的染色——而是与音乐共同呼吸的有机过程。”​

🔧 系统要求：

  • Windows 7+（VST2/VST3格式）
  • macOS兼容性未完全验证（需用户自行测试密钥生成器）
  • 支持44.1kHz–192kHz采样率

理想处理对象：

  • 数字合成器：赋予振荡器模拟设备的热机感
  • 采样鼓组：恢复录音的模拟冲击力
  • 对话音频：为旁白添加老式广播设备的亲切感
Antistatic saturation meets organic movement.

Drive – Adjust the intensity of harmonic saturation.

  • Area – Choose the target frequency zone: Low, Mid, or High.
  • Area Spectrum Control – Fine-tune each range with three independent saturation points.

Impedance – Adds natural, dynamic movement.

  • Tone – Follows signal dynamics for organic tonal response.
  • Bump – Introduces extra energy.

Developed in collaboration between Wavegrove and Tape Over, Mariform fuses analog transformer behavior with carefully tuned harmonic control for an organic, musical response.

At the heart of Mariform lies a custom transformer, engineered to deliver realistic transformer saturation. Whether you're aiming for subtle warmth or rich, harmonically complex drive, Mariform provides an authentic sound through its movement, tonality and character.

Mariform is made for instruments, groups and the mix bus. Need a huge low end with harmonics? Done. Nasty spikes from guitars and drum cymbals? No flux given. A flat sounding stem? Not anymore. Mid range needs some sweet old character? As if baked by your grandmother.

Pin point targeted focus for high end, huge thump for your lows.

Further features:

  • MariAir – A smooth high-frequency shelf EQ for air and openness.
  • Clipper (Pre/Post) – Choose to clip before or after saturation.
  • Mid/Side Processing – Apply saturation to mono or side channels for controlled depth or width.
  • High Cut & Low Cut – Limit the processing to your desired frequency range.
  • Calibration – Control the overall depth and impedance response.
  • Input & Output Gain – Adjust gain staging for optimal harmonic drive.
  • Blend – Mix between dry and processed signals.
  • Stereo and MS Balance – Refine stereo placement.
  • Mid/Side Balance – Adjust the relationship between mid and side content.
  • Delta Monitoring – Audition the difference signal to hear what Mariform adds.

Our keygen might work for macOS too, but untested. try it yourself

下载地址:

TOPICS